Easily remove your 2010 Ford Focus door panel yourself with this simple step-by-step process from AFA Tooling Approved for Automotive. With just one set of t
I spent all of yesterday trying to remove the glass window from rear passenger side door of my Ford Focus MK2.5. I followed the service manual which made the process easy but I'm stumped on the last step. I can't actually pull the window out of the door. The manual says to pull the window upwards
2. From inside the luggagecompartment remove the wing nutof the rear light assembly cover. 3. Using a Phillips screwdriverremove the screw. The lamp is stillretained by a spring loaded clip.Remove by gently pulling out thelight housing. 4. Turn the bulb socket counterclockwise as far as possible and pull itout. 5. Pull the bulb straight out of
Unplugged the cable loom from the old unit. Checked the units were same size and the plugs were the same. Attached the new unit and tested the lights, dimmer and levellers. Pushed the new unit into place (takes a bit of a push). Relocated the ODB port into the trim and refitted to dash.
105 posts · Joined 2017. #10 · Apr 29, 2019. I have removed a headliner from a ST before. It is totally doable but is time consuming and Ford uses this heavy duty hot glue to glue all the factory wiring to the headliner. You need to be careful pulling all the wires from the headliner. And I did have the seats removed before I pulled it out
. 401 369 321 279 476 308 342 483
ford focus mk2 interior light removal
